How much does texture coating cost?
Texture coating a sound wall costs about $25 to $50 per square metre, and a full texture coat render system, with render underneath, runs $57 to $115 per square metre in Sydney, typically about $80. On a single-storey house with 150 m² of wall, that works out to roughly $3,750 to $7,500 for a coat over sound walls, or about $12,000 for the full system.
Last checked
How much does texture coating cost per square metre?
Two prices get called "texture coating", so check which one a quote means. A texture coat applied over walls that are already sound and flat is about $25 to $50 per m² on The Quote Yard's 2026 figures. A texture coat render system, which builds the render and the textured finish together, is $57 to $115 per m² in Sydney (What's The Damage, verified October 2026).
The gap between the two is the render. A texture coat is a thick acrylic coating rolled or troweled onto a wall that is already sound, and it veils minor irregularities. A render system puts down a new base first, which is what corrects a wall that is uneven, patched or mismatched, and that base is most of the extra cost.
| Job | Typical rate (2026) |
|---|---|
| Texture coating over a sound wall | $25–$50 per m² |
| Texture coat render system (sand, fine or coarse), Sydney | $57–$115 per m², typical $80 |
| Acrylic render system, Sydney | $46–$80 per m² |
| Cement render with sponge or float finish, Sydney | $34–$69 per m², typical $52 |
| Bagging | $20–$40 per m² |
| Render repair or patch | $300–$1,500 per job |
| Painting existing render, NSW (for comparison) | $18–$38 per m² |
Texture over sound walls, bagging and repair: The Quote Yard, rendering and texture coating costs (published 24 August 2026). Sydney systems: What's The Damage, texture coat and render finishes cost in Sydney (verified October 2026). Painting render: The Quote Yard, render painting cost NSW (2026).
How much does it cost to texture coat a house?
For a single-storey house with about 150 m² of external wall, a texture coat over sound walls comes to roughly $3,750 to $7,500 at $25 to $50 per m². A full texture coat render system at Sydney's typical $80 per m² is about $12,000, and What's The Damage puts the gap between typical cement render and texture coat render on that house at about $4,200.
To get your own wall area, measure the length of each wall, multiply by its height and take off the big openings: garage doors, sliding doors and large windows.
Sydney rates are the upper end for the Illawarra. The Quote Yard notes that Sydney painting rates run 15 to 25 per cent above regional NSW,, so expect Illawarra quotes to sit at or below these Sydney figures.
| 150 m² of wall, single storey | Rate used | Total |
|---|---|---|
| Repaint existing render | $18–$38 per m² | $2,700–$5,700 |
| Texture coat over sound walls | $25–$50 per m² | $3,750–$7,500 |
| Cement render, sponge finish (Sydney typical) | $52 per m² | $7,800 |
| Texture coat render system (Sydney typical) | $80 per m² | $12,000 |
Worked example: wall area multiplied by the published rates above. Scaffolding, crack repair and painting a sponge-finish render are on top where they apply.
What is the difference between rendering and texture coating?
Rendering puts a new layer of cement or acrylic render over the wall, which can correct major unevenness and change brick into a smooth or sponged surface. Texture coating is a thinner, flexible acrylic finish that goes over a wall that is already sound, hiding minor faults rather than correcting big ones. Render often still needs painting; a texture coat is usually tinted through.
In practice the choice comes down to what the wall is like now. Face brick or blockwork that you want to look completely different needs render, or a system that includes it. Render that is sound but tired, patched in places or a colour you're sick of is the classic texture-coat job: The Quote Yard describes a texture coat over tired render as buying another decade without touching the substrate.
If the render itself is fine and only the colour is the problem, painting it is cheaper again, at $18 to $38 per m² in NSW. Our render painting cost page has that breakdown.
What pushes the price of texture coating up?
Mostly preparation, the finish and access. Cracked, drummy or painted walls need repair before anything goes on, and cracks wider than 3 mm or with stepped displacement warrant an engineer's look first, at $300 to $600. Finer textures and custom tints cost more than standard colours, and a second storey adds scaffolding.
Near the coast, check the system is rated for it. Salt-laden wind off the Tasman is hard on any exterior coating, and a flexible acrylic system with proper control joints holds up better than a rigid finish on a house that moves. Our salt line page shows how close your suburb sits to the sea.
- Wall condition: a texture coat over sound render is the cheap end; repairing, stabilising or removing old render first is not.
- Finish: sponge or float is cheapest, then sand, fine and coarse texture coats, then coloured-through and designer finishes.
- Wall shape: long uninterrupted walls go faster per square metre than walls broken up by windows, steps and corners.
- Height: double-storey work needs scaffolding.
- Colour: standard tints cost less than a custom colour matched across a whole system.
How long does texture coating last?
A well-prepared flexible acrylic system with correct joints should hold for about a decade, and can be recoloured over for another, on The Quote Yard's description. Where a tinted-through texture coat saves money is repainting: there is no separate paint coat to renew, so the wall goes longer before it needs anything at all.
Questions people ask
How much does texture coating cost per m²?
About $25 to $50 per m² for a texture coat over a sound wall (The Quote Yard, 2026), and $57 to $115 per m² for a full texture coat render system in Sydney, typically $80 (What's The Damage, October 2026).
Is texture coating cheaper than rendering?
Over a sound wall, yes: $25 to $50 per m² against $34 to $69 per m² for cement render in Sydney, and cement render usually still needs painting. A texture coat can't correct a badly uneven wall, though, and that is where render earns its price.
Can you texture coat over brick?
Over sound, clean brick, yes, usually as part of a render or texture system that levels the mortar joints first. Over brick in poor condition, or to get a smooth modern look, a full render is the better job.
Do you need to paint texture coating?
Usually not. Most texture coats are tinted through, so the colour is in the coating itself. Some are finished with a paint coat, and painting over a texture coat later is a standard way to change its colour.
How much does it cost to texture coat a single-storey house?
With about 150 m² of wall, roughly $3,750 to $7,500 for a texture coat over sound walls, or about $12,000 for a full texture coat render system at Sydney's typical $80 per m². Scaffolding and repairs are extra.