How much does it cost to paint a roof?
Painting a roof in NSW costs about $25 to $45 per square metre for a metal or Colorbond roof and $35 to $55 for concrete tile, including cleaning, priming and two coats. A whole house usually comes to $3,500 to $8,000 for metal, $5,000 to $12,000 for concrete tile and $5,500 to $14,000 for terracotta.
Last checked
How much does roof painting cost per square metre?
On The Quote Yard's 2026 NSW figures, $25 to $45 per square metre for metal roofs (Colorbond, corrugated iron, Zincalume), $35 to $55 for concrete tile and $35 to $60 for terracotta. Tile costs more because the porous surface drinks more coating and needs a sealer, and lichen has to be killed and blasted off first.
| Roof type | Per m² | Whole roof, typical house |
|---|---|---|
| Metal (Colorbond, corrugated iron) | $25–$45 | $3,500–$8,000 |
| Concrete tile | $35–$55 | $5,000–$12,000 |
| Terracotta tile | $35–$60 | $5,500–$14,000 |
| Pressure clean only | – | $400–$1,200 |
| Rust treatment (metal) | $15–$30 per affected m² | – |
| Ridge capping repoint and paint (tile) | – | $800–$2,500 |
The Quote Yard, roof painting cost NSW (2026). Rates include pressure cleaning, priming and two coats. Regional NSW typically runs 10–20% below Sydney.
How much does it cost to paint a whole roof?
Multiply the roof area by the rate for its material. Take a 200 m² roof, a common size for a single-storey family home once the eaves are counted: that is $5,000 to $9,000 for metal and $7,000 to $11,000 for concrete tile, before ridge capping or rust repairs.
A two-storey house costs more per square metre than a single-storey one with the same roof, because of the extra height safety work and the longer carry of gear. NSW work health and safety law requires fall protection on any roof work above two metres, so a quote with no edge protection or harness line in it is not cheaper, it is incomplete.
| Worked example: 200 m² roof | Rate used | Total |
|---|---|---|
| Colorbond, sound, single storey | $25–$45 per m² | $5,000–$9,000 |
| Concrete tile, cleaned, sealed, two coats | $35–$55 per m² | $7,000–$11,000 |
| Concrete tile plus ridge capping repoint | as above + $800–$2,500 | $7,800–$13,500 |
| Older iron roof with 20 m² of surface rust | $25–$45 per m² + $15–$30 per rusty m² | $5,300–$9,600 |
Worked example: area multiplied by the published NSW rates above. Your own roof area is on the plans, or about the house footprint plus 10–20% for pitch and eaves.
How much does it cost to paint a Colorbond roof?
About $25 to $45 per square metre in NSW, so $3,500 to $6,000 for most single-storey homes and $5,000 to $8,000 for two storeys. Faded Colorbond can be repainted, but the chalky oxidised layer has to be degreased and washed off first, then a Colorbond-compatible roof coating goes on, or the new paint lifts.
Near the beach, metal roofs rust faster. The Quote Yard notes that older iron roofs on the Illawarra coast and Sydney's beachfront often show surface rust within five to eight years of a previous coat, against fifteen years or more inland. Our Salt Line shows how much of your suburb sits in the harsh coastal band.
Is painting your roof worth it?
Usually yes, if the roof is sound. A repaint costs a fraction of a new roof, stops lichen and UV wearing tile surfaces down, slows rust on metal and changes how the whole house looks from the street. It is not worth it over through-rust, cracked tiles or failed ridge mortar: those need a roofer first, or the coating just hides the problem.
- Worth it: faded Colorbond, chalky concrete tiles, lichen-covered tiles, a colour change before selling.
- Not on its own: holes rusted through the sheet, many broken tiles, leaks into the ceiling.
- Ask instead: sound unglazed terracotta often looks better cleaned and resealed than painted, and costs less.
- Bundle it: painting the roof with the house exterior means access and set-up are paid for once.
Can I paint my roof myself?
You can legally paint your own roof in NSW, but it is the most dangerous painting job on a house. Most of the cost is preparation and height safety, not paint: a high-pressure clean, biocide on lichen, rust treatment, a sealer or primer and two coats, all done standing on a pitched, wet, fragile surface.
If you do it, hire roof edge protection or a harness and anchor, never walk on tiles you have not checked, and use a coating made for the roof material. Ordinary exterior house paint is not a roof coating. If you hire someone, any residential job over $5,000 including GST needs a contractor licensed under the Home Building Act 1989, which most whole-roof repaints will be.
What makes roof painting cost more?
Roof area and material set the base, then condition and access move it. Heavy lichen on tiles, rust on metal, a steep pitch, a second storey, valleys and dormers, failed ridge capping and a coastal salt-air coating all push a roof toward the top of its range.
Our roof painting cost breakdown lists every line, and roof painting in Wollongong shows the prices for your suburb.
- Condition: lichen roots, rust patches and chalky old coatings all mean more preparation.
- Pitch and height: steep or two-storey roofs need more safety gear and take longer.
- Shape: hips, valleys, dormers and chimneys slow every coat down.
- Ridge capping: repointing before painting is $800–$2,500 on a tile roof.
- Salt air: coastal roofs need coatings rated for it, which cost more per litre.
Questions people ask
How much does it cost to paint a roof in NSW?
About $3,500 to $8,000 for a typical metal roof, $5,000 to $12,000 for concrete tile and $5,500 to $14,000 for terracotta, including pressure cleaning, priming and two coats (The Quote Yard, 2026).
What is the roof painting cost per m2?
In NSW, $25 to $45 per square metre for metal and Colorbond, $35 to $55 for concrete tile and $35 to $60 for terracotta.
How much does it cost to paint a Colorbond roof?
About $25 to $45 per square metre in NSW: $3,500 to $6,000 for most single-storey homes and $5,000 to $8,000 for two storeys, including degreasing and a Colorbond-compatible coating.
Is painting your roof worth it?
Yes, if the roof is structurally sound: it costs a fraction of a new roof and protects tiles and metal from UV, lichen and rust. Through-rust, cracked tiles or failed ridge mortar need a roofer first.
Can you paint terracotta roof tiles?
Yes, with a specialist high-adhesion primer, at $35 to $60 per square metre in NSW. Glazed terracotta peels without one. Sound unglazed terracotta is often better cleaned and resealed than painted.