How much does it cost to paint a fence?
Painting a fence in NSW costs about $18 to $30 per linear metre for a timber paling fence painted on one side, $28 to $45 for both sides, $14 to $28 for Colorbond or metal, and $20 to $40 for brick. A 20 metre timber run is roughly $360 to $600, and a whole suburban boundary of 50 to 70 metres about $1,100 to $1,960.
Last checked
How much does fence painting cost per metre?
It depends on what the fence is made of and whether both faces get painted. On The Quote Yard's 2026 NSW figures, timber paling runs $18 to $30 per linear metre on one side and $28 to $45 on both, Colorbond and metal $14 to $28, brick $20 to $40, and timber pickets $25 to $50, because each picket is cut in by hand.
| Fence type | Per linear metre | Typical 20 m run |
|---|---|---|
| Timber paling, one side | $18–$30 | $360–$600 |
| Timber paling, both sides | $28–$45 | $560–$900 |
| Colorbond or metal | $14–$28 | $280–$560 |
| Brick or masonry | $20–$40 | $400–$800 |
| Timber picket | $25–$50 | $500–$1,000 |
| Rendered masonry front fence (both faces and capping) | $30–$60 | $600–$1,200 |
The Quote Yard, fence painting cost NSW (2026). Prices include GST, labour and paint.
How much does it cost to paint a whole boundary fence?
A typical suburban block has 50 to 70 metres of fence once the sides, the back and the street frontage are added up. At $22 to $28 a metre for timber paling on one side, The Quote Yard puts the whole boundary at $1,100 to $1,960 as a standalone job. A 15 metre run on its own is $500 to $900, because the painter's set-up cost is spread over fewer metres.
To measure your own, pace out each run of fence and add them up. Count a gate as about a metre of fence, then add a little for the fiddly hinges and latches.
The figure most quotes differ on is the second side. A boundary fence has two faces, and the one facing your neighbour is part of their garden too, so agree with them before anyone paints their side a new colour.
| Worked example: 55 m of fence (20 m each side, 15 m across the back) | Rate used | Total |
|---|---|---|
| Timber paling, your side only | $18–$30 per m | $990–$1,650 |
| Timber paling, both sides | $28–$45 per m | $1,540–$2,475 |
| Colorbond, your side only | $14–$28 per m | $770–$1,540 |
| Same timber fence, added to a house exterior repaint (15–25% off) | about $14–$26 per m | about $745–$1,400 |
Worked example: fence length multiplied by the published NSW rates above. Replacing broken palings, rust treatment and gates are on top.
How much does it cost to paint a Colorbond fence?
About $14 to $28 per linear metre in NSW, so $280 to $560 for a 20 metre run. Colorbond is the cheapest fence to paint per metre because the sheets are flat and there are no gaps to cut in, but it needs the right primer: ordinary exterior paint does not grip the slick factory finish.
The steps are a degrease and wash, a light scuff, an adhesion primer made to bond to the factory coating, then two topcoats of a compatible exterior acrylic. Any rust, usually along the bottom rail or where garden beds sit against the panels, has to be treated first, or the new coat lifts within a season.
Can you paint a Colorbond fence?
Yes. Colorbond steel can be painted once it is cleaned and degreased and an adhesion primer has gone on first; skip the primer and the paint peels off the factory finish. Most people repaint Colorbond to change a faded colour or to match a new house colour, not because the steel needs protecting.
Close to the beach, salt settles on fence panels the same way it settles on everything else, and it has to be washed off before any coating goes on. Our salt line page shows how close your suburb sits to the sea.
Is it cheaper to paint or stain a timber fence?
The labour is similar, but they last differently. A penetrating stain soaks into the timber and lasts about four to seven years on upright palings before it needs recoating, while a good exterior paint lasts six to ten years. Stain keeps the grain showing and wears away rather than peeling, so recoating it is less preparation.
- Weathered grey timber needs washing and sanding before either goes on, and that preparation is often the biggest part of the price.
- New treated pine has to weather before it will hold a coating at all.
- Once a fence is painted, going back to stain means stripping it, so the first choice tends to stick.
What makes fence painting cost more?
Mostly preparation and access. A fence left for ten years has grey timber, peeling old paint, rusty nails and split palings, and each of those is work before the first coat. Both sides, pickets, gates, plants growing through, and a fence painted on its own rather than with the house all push the price up.
If the house is due for a repaint too, price them together. Our exterior painting cost guide covers the house, and fence and deck painting has deck restoration prices.
- Condition: washing, sanding and spot priming weathered timber; treating rust on metal.
- Both faces: roughly the difference between $18–$30 and $28–$45 a metre on timber.
- Detail: pickets and lattice take far longer per metre than flat palings or sheets.
- Access: garden beds, hedges and sheds hard against the fence.
- Doing it alone: a fence added to a house exterior repaint typically costs 15 to 25 per cent less per metre.
Questions people ask
How much do painters charge to paint a fence?
In NSW, $18 to $30 per linear metre for timber paling on one side, $28 to $45 for both sides, $14 to $28 for Colorbond and $20 to $40 for brick (The Quote Yard, 2026). Paint and labour are usually included in that rate.
How much does it cost to paint a 20 metre Colorbond fence?
About $280 to $560 at $14 to $28 per linear metre in NSW, including an adhesion primer and topcoats. Rust treatment along the bottom rail is extra.
How long does a painted fence last?
A good exterior paint lasts six to ten years on a timber fence, and a penetrating stain four to seven years on upright palings, before recoating is needed.
Is it cheaper to paint a fence with the house?
Yes. Adding the fence to a house exterior repaint typically costs 15 to 25 per cent less per metre than a fence-only job, because the painter is already set up on site.
Do I need to paint both sides of a boundary fence?
No, most quotes cover your side only. Painting both sides costs more ($28 to $45 per metre on timber against $18 to $30) and the other face is your neighbour's, so agree it with them first.